Texas-instruments TMS320C64x DSP Uživatelský manuál Strana 212

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 306
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 211
Video Display Registers
4-67Video Display PortSPRU629
4.12.8 Video Display Field 2 Vertical Blanking End Register (VDVBLKE2)
The video display field 2 vertical blanking end register (VDVBLKE2) controls
the end of vertical blanking in field 2. The VDVBLKE2 is shown in Figure 446
and described in Table 413.
In raw data mode, VBLNK is deasserted whenever the frame line counter
(FLCOUNT) is equal to VBLNKYSTOP2 and the frame pixel counter (FPCOUNT)
is equal to VBLNKXSTOP2 (this is shown in Figure 46, page 4-7).
In BT.656 and Y/C mode, VBLNK is deasserted whenever
FLCOUNT = VBLNKYSTOP2 and FPCOUNT = VBLNKXSTOP2. This
VBLNK output control is completely independent of the timing control codes.
The V bit in the EAV/SAV codes for field 2 is controlled by the VDVBIT2 register.
Figure 446. Video Display Field 2 Vertical Blanking End Register (VDVBLKE2)
31 28 27 16
Reserved
VBLNKYSTOP2
R-0 R/W-0
15 12 11 0
Reserved VBLNKXSTOP2
R-0 R/W-0
Legend: R = Read only; R/W = Read/Write; -n = value after reset
Zobrazit stránku 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 305 306

Komentáře k této Příručce

Žádné komentáře